Work

Generation of Eroded Nanoplastics from Real World Wastes and Their Capacity for Heavy Metal Adsorption

Year: 2025

Type: article

Abstract: Our study investigates the generation of nanoplastics (NPs) from real-world plastic waste and their capacity to adsorb heavy metal (HM) ions. NPs, synthesized from polyethylene terephthalate (PET), polystyrene (PS), and polypropylene (PP) using a milling method, were characterized using dynamic light scattering (DLS) and scanning electron microscopy (SEM), confirming particle sizes below 200 nm. Manganese (Mn 2+ ), cobalt (Co 2+ ), zinc (Zn 2+ ), cadmium (Cd 2+ ), and lead (Pb 2+ ) at concentrations ranging from 50.0 parts per billion (ppb) to 2.0 ppm (ppm) were exposed to the NPs. Residual HM concentrations were measured using inductively coupled plasma mass spectrometry (ICP-MS). PP exhibited the highest adsorption capacities, with Langmuir maximum adsorption capacity ( q m ) values of 90.91 μg per gram (μg/g) for Mn 2+, 114.94 μg/g for Co 2+, 101.01 μg/g for Zn 2+, and 107.53 μg/g for Cd 2+ . Pb 2+ showed rapid adsorption, with over 99% adsorption within 5 min, with a capacity of 396.1 μg/g on PP, 390.6 μg/g on PET, and 393.2 μg/g on PS. Adsorption kinetics followed a pseudo-second-order model, suggesting chemisorption, while Langmuir and Freundlich isotherms supported monolayer adsorption.

Source: ACS ES&T Water

DOI: 10.1021/acsestwater.4c01191

Authors: Ananda Pokhrel, Mohammad Saiful Islam, Somenath Mitra

Institution: New Jersey Institute of Technology

Language: English

Topic: Microplastics and Plastic Pollution

Subfield: Pollution

Field: Environmental Science

Domain: Physical Sciences

SDGs: Responsible consumption and production, Clean water and sanitation

Open Access status: green

Funders: National Institutes of Health, National Institute of Environmental Health Sciences