Comparative Analysis of the Oxy-Fuel Kinetic Mechanisms by the Ignition Delay Time of Methane
Year: 2025
Type: article
Abstract: Supercritical oxy-fuel combustion, which allows for the high efficiency of power generation with near-zero CO2 emissions, is considered a promising method to reduce the carbon footprint in the power energy sector. One of the problems in the widespread use of oxy-fuel combustion is a lack of comparative studies on the existing oxy-fuel combustion kinetic mechanisms depending on mixture composition, which complicates the choice of a kinetic mechanism for modeling oxy-fuel combustion. In this paper, a comparative verification of the kinetic mechanisms of GRI-Mech 3.0, UoS sCO2 2.0, OXY-NG, and Skeletal was performed using published experimental data on the ignition delay time of methane under conditions of oxy-fuel combustion. A comparative numerical study of the kinetic mechanisms in the wide range of pressures, CO2 mass fractions in oxidizer (γ), and excess oxidizer ratios (α) by the ignition delay time is also carried out. It was found that the limits of applicability of all of the mechanisms studied are absent when modeling the ignition delay time, the most accurate mechanism to model the IDT of methane in oxy-fuel conditions being UoS sCO2 2.0, while the other three mechanisms are overall much inferior to it in terms of accuracy. However, Skeletal and GRI-Mech 3.0 mechanisms can be used to model the IDT during the oxy-fuel combustion of methane under both atmospheric and supercritical conditions, although only in a narrow range of γ.
Source: Energies
DOI: 10.3390/en18092155
Authors: Sergey Osipov, Vladimir Sokolov, Vadim Yakovlev, Muhammad Maaz Shaikh, Nikolay Rogalev
Institution: Moscow Power Engineering Institute
Language: English
Subfield: Fluid Flow and Transfer Processes
Field: Chemical Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $3,137
Funder: Russian Science Foundation
Award: G3712519093
OpenAlex ID: W4409702216