Get started
Work

Performances of microvalve using magnetorheological fluid droplet as switching element

Year: 2025
Type: article
Abstract: Magnetorheological fluid (MRF) can be made to behave like a solid in a magnetic field, controlling microchannel flow. A novel microchannel valve design employs an MRF droplet and magnetic field for valve control. The proposed valve assembly incorporates a permanent magnet array, an MRF droplet, and a microchannel integrated by a reservoir. By regulating the permanent magnet array, the MRF droplet may stay in the reservoir or fill in the microchannel, thus resulting in the opening and closing of the channel, respectively. The numerical simulation as well as experimental validation was conducted to investigate the effects of geometrical parameters of the reservoir on the morphology and pressure resistance of the MRF droplet. A reservoir length of 6 mm yields a response time of approximately 2.1 s for valve closure and 0.5 s for valve opening, respectively. At a flow rate of 5 µl min−1, a combined experimental and simulation approach has been employed to predict potential leakage points of MRF droplet valves with different reservoir lengths. It can be seen that when the reservoir length is between 6 and 14 mm, the rupture point of the MRF droplet occurs near the junction between the reservoir and the channel. Nevertheless, for the length between 16 and 18 mm, the rupture subsequently relocated to the upper portion of the channel. A comprehensive analysis of the influence of reservoir length on the pressure resistance of the valve shows a changing pattern, indicating that the valve exhibits optimal pressure resistance at the length of 12 mm, with a critical pressure difference of around 600 Pa.
DOI: 10.1088/1361-665x/adcfdd
Language: English
Open Access status: hybrid
Estimated APC paid: $3,325
OpenAlex ID: W4409717496
FWCI:
Cites: 46
Cited by:
Related to: 10