Year: 2025
Type: article
Abstract: The objective here is to study the effect of pre-strain on fatigue crack growth (FCG) in 2024-T351 aluminium alloy. Three pre-strain conditions were considered: without pre-strain, compressive and tensile permanent pre-strains of 4%. A numerical approach based on cumulative plastic strain at the crack tip was followed to predict FCG rate. The compressive pre-strain increased FCG rate, while the tensile pre-strain reduced the da/dN relatively to the situation without pre-strain. The influence of pre-strain was linked with plasticity induced crack closure. In fact, a linear trend was obtained between da/dN and DKeff for three crack lengths (a=16.184; a=15.048 mm and a=15.152 mm) and three pre-strain conditions. The increase of stress ratio from R=0.1 to R=0.5 and the elimination of the contact of crack flanks reduced significantly the effect of pre-strain, also pointing for the huge relevance of crack closure in this context. Finally, the effect of pre-strain on da/dN after an overload was also explained by crack closure variations.
Source: Metals
DOI: 10.3390/met15050481
Institution: University of Coimbra
Language: English
Subfield: Mechanics of Materials
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $3,137
OpenAlex ID: W4409764482