Ultrasonic power and data transfer for active medical implants using adaptive beamforming
Year: 2025
Type: article
Abstract: Wireless power transfer provides a sustainable power source for active medical implants. Recent developments in biosensors, MEMS technologies and the advent of ubiquitous computing has opened up the potential for a millimeter-sized active medical implant for continuous health monitoring. Frequent wireless communication and data processing requires more energy than traditional active medical implants. Therefore, a continuous power source is needed. This study investigated the development of an ultrasonic power transfer (USPT) system for active medical implants. The system, comprised of a wearable and an implantable device, can transfer both power and data between the implant and the wearable. By implementing beamforming, it can adapt to misalignment between the transmitter and the receiver. In the experiments, the receiver outputs 0.16 mW after rectification, when transmitting through 0.5 cm of water. By measuring the time-of-flight (ToF) of a pulse transmitted from the receiver, implant position feedback is achieved. Data transfer is demonstrated at a rate of 1 kbit/s, across a 4 cm path in water, which is adequate for many biomedical applications. • A wireless power and communication platform was built for biomedical implants. • The phased array system can adaptively focus acoustic energy to the implant. • We successfully incorporated a Cockcroft-Walton voltage multiplier for power conditioning. • A microcontroller was powered only using energy delivered through ultrasound.
Source: Micro and Nano Engineering
Institutions: Loughborough University, Beijing Institute of Technology
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $1,780
Funder: Loughborough University
OpenAlex ID: W4409919285