Work

Enhanced mechanical properties of a nickel-based superalloy by regulating laves and δ phases via hot rolling deformation

Year: 2025

Type: article

Abstract: This article investigated the precipitation behaviors of laves phase and δ phase, and the mechanical properties of a nickel-based superalloy. The results show that the bulk laves phase surrounded by the acicular δ phase formed at the grain boundaries in the as-homogenization heat treated alloy. After 20% rolling deformation at 550°C, the laves phase re-dissolved and the δ phase bent, resulting in a simultaneous increase of 67.9%, 27.4% and 60.7% in the yield strength (YS), ultimate tensile strength (UTS) and ductility of the alloy, respectively. A favorable combination of mechanical properties was achieved, with the YS being 576 MPa, the UTS being 689 MPa and the elongation being 28.6%. When 40% rolling deformation was carried out at 750°C, the YS and UTS of increase significantly to 1194 MPa and 1240 MPa, and an acceptable elongation of 8.3% due to the fragmentation of the laves phase and the fracture of the δ phase. The relationship between the microstructural evolution and the mechanical properties of the alloy was discussed. These findings offer valuable insights into the microstructural control of the laves phase and δ phase in nickel-based superalloys, providing an effective strategy for optimizing the mechanical performance.

Source: Journal of Materials Research and Technology

DOI: 10.1016/j.jmrt.2025.04.330