Effect of Process Parameters on Metallurgical Behavior of Liquid Steel in a Thickened Compact Strip Production Mold with Electromagnetic Braking
Year: 2025
Type: article
Abstract: Herein, a three-dimensional mathematical model was established to investigate the metallurgical behavior of liquid steel in a funnel-shaped mold equipped with single-ruler electromagnetic braking (EMBr). The effects of mold thicknesses, electromagnetic intensity, and casting speed in flow behavior were investigated. The results indicate that with EMBr, multiple pairs of induced current loops are present in the horizontal section of the magnetic pole center, distributed in pairs between the jets and broad faces. The Lorentz force acting on the main jet, which impacts the downward and upward flow at adjacent broad faces, is opposite in direction. Increasing mold thickness results in a larger jet penetration depth, leading to a higher meniscus temperature near the narrow faces accompanied by elevated velocity and turbulent kinetic energy. EMBr can lead to a decrease in shell thickness and an improvement in its uniformity at mold exit. For the thickened mold, as the magnetic flux density increases and the casting speed decreases, the penetration depth of jets and velocity near the narrow faces and meniscus decreases. The shell thickness decreases as the casting speed increases, with the lowest non-uniformity coefficient of 6.78% observed at a casting speed of 5.0 m/min.
Source: Processes
DOI: 10.3390/pr13051427
Institutions: Wuhan University of Science and Technology, Baosteel (China)
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,896
OpenAlex ID: W4410155840