Work

Condensation heat transfer for zeotropic mixtures of propane and n-butane on single tubes and in tube bundles

Year: 2025

Type: article

Abstract: • Condensation heat transfer of zeotropic mixtures on horizontal tubes is studied. • Raman spectroscopy is used to monitor the vapor composition. • Preferential condensation leads to significant reductions in the heat transfer. • The tube bundle effect significantly increases condensation heat transfer. • The film model can predict zeotropic mixture condensation on smooth copper tubes. This work presents experimental condensation heat transfer coefficients α cond for different binary zeotropic mixtures consisting of propane and n -butane on horizontal single tubes and in tube bundles measured with a setup specifically modified for this purpose. To study the influence of the condensation tube characteristics on α cond , smooth, finned, and high-performance condensation tubes were investigated. The finned tubes include a systematic variation in the fin density and fin height. Besides pure copper, also a copper-nickel alloy was studied as tube material. During the condensation experiments, the vapor composition was measured continuously with the help of Raman spectroscopy, whose application for mixture condensation in a heat exchanger is presented in this work for the first time. The results show that α cond for zeotropic mixtures is significantly smaller than that for the pure substances because of the formation of a so-called diffusion film caused by the preferential condensation of the high-boiling mixture component. In tube bundle experiments, on the other hand, the impinging condensate from upper tube rows obviously break this diffusion film up, resulting in a significant increase of up to 670 % in α cond with increasing irrigation mass flow rate.

Source: International Journal of Heat and Mass Transfer

DOI: 10.1016/j.ijheatmasstransfer.2025.127176