Work

Study on the Suppression of Tip Leakage Vortex in Axial Flow Pumps Based on Circumferential Grooving in the Rotor Chamber

Year: 2025

Type: article

Abstract: The stability of axial flow pumps is significantly affected by the tip leakage vortex (TLV), which is generated through the entrainment of the main flow. This study explores the effects of circumferential grooving in the rotor chamber on the tip leakage vortex of an axial flow pump by using the SST k-ω turbulence model. Numerical results were validated with prototype pump experiments. At the design condition, circumferential grooves positioned near the blade leading edge enhance both the pump’s efficiency and head. Grooves implemented at the mid-chord to trailing-edge regions are relatively close to those of the prototype pump. The implementation of grooves at both leading and trailing regions resulted in significantly degraded performance compared to the other two cases. However, at reduced flow rates, grooving in the rotor chamber leads to a decline in performance. Grooves positioned near the blade’s leading edge interfere with the ingress of the TLV into the suction side, suppressing vortex formation. Vortex structures and low-pressure regions are closer to the blade, reducing flow instability. In contrast, grooving in the middle and rear rotor chamber induces instability in the tip region. These findings offer theoretical guidance for suppressing the TLV and enhancing the stability of axial flow pumps.

Source: Journal of Marine Science and Engineering

DOI: 10.3390/jmse13050972

Authors: Haoran Wu, Desheng Zhang, Xi Shen, Chen Ni, Gang Yang

Institution: Jiangsu University

Language: English

Topic: Turbomachinery Performance and Optimization

Subfield: Aerospace Engineering

Field: Engineering

Domain: Physical Sciences

Open Access status: gold

Estimated APC paid: $3,137

Funder: National Natural Science Foundation of China