Work

Thermal Insulation Performance of Epoxy-Based Intumescent Coatings: Influence of Temperature-Induced Porosity Evolution on Heat Transfer Resistance

Year: 2025

Type: article

Abstract: This study investigated the thermal performance of reduced super intumescent (RSI) coating, focusing on the correlation between porosity evolution and thermal conductivity under elevated temperature conditions. Porosity development was quantified using scanning electron microscopy (SEM) combined with MATLAB-based image analysis, achieving a maximum porosity of 62% after 60 min of exposure. Thermal degradation was characterized using thermogravimetric analysis (TGA), which recorded a mass loss of 35% between 250 °C and 400 °C, capturing the decomposition kinetics and correlating degradation stages with char formation. Fire protection efficiency was evaluated by employing heat flow meter tests (thermal conductivity reduced from 0.15 W/mK to 0.05 W/mK), methane torch experiments (backside temperature increase delayed by up to 50% compared to uncoated steel), and COMSOL-based heat transfer simulations. The results revealed that the RSI coating's thermal conductivity decreased as its porosity increased, enhancing its insulation effectiveness. Additionally, the formation of a thermally stable char layer at 400 °C significantly reduced heat transfer to the metal substrate by 66%. These findings support the optimization of bio-derived fire-retardant coatings for passive fire protection applications.

Source: Polymers

DOI: 10.3390/polym17111426