Effect of the metallic substrates on the tribological performance of fused filament fabricated sliding layers made of PEEK-based materials
Year: 2025
Type: article
Abstract: The motivation of this research is to explore the impact of different metallic substrates, i.e. aluminum and steel, on the tribological performance of fused filament fabricated polyetheretherketone (PEEK)-based sliding layers by means of a plate-on-ring (PoR) tribometer. The sliding wear tests were conducted under dry sliding conditions with a broad range of load conditions and the steel counterpart used is a 100Cr6 steel ring. Experimental results demonstrate that the coefficient of friction (COF) of the printed neat PEEK sliding layer does not show significant variation between the metallic substrates, while its specific wear rate on the aluminum substrate is significantly lower compared to that on the steel substrate. Interestingly, the COF and wear rate of the sliding layer manufactured by using a PEEK tribocomposite exhibit much higher values on the aluminum substrate than those on the steel substrate. By simulating the contact temperature between the sliding pair, it is revealed that different metallic substrates alter the thermal behavior of the system due to their different thermal conductivities, which affects the tribological performance, including friction and wear mechanisms.
Source: Wear
Language: English
Topic: Tribology and Wear Analysis
Subfield: Mechanics of Materials
Field: Engineering
Domain: Physical Sciences
Open Access status: hybrid
Estimated APC paid: $5,394
Funder: Deutsche Forschungsgemeinschaft
OpenAlex ID: W4410616112