Get started
Work

Design of dedicated tilt-to-length calibration maneuvers for LISA

Year: 2025
Type: article
Abstract: Tilts of certain elements within a laser interferometer can undesirably couple into measurements as a form of noise, known as tilt-to-length (TTL) coupling. This TTL coupling is anticipated to be one of the primary noise sources in the Laser Interferometer Space Antenna mission, after time delay interferometry is applied. Despite the careful interferometer design and calibration on the ground, TTL is likely to require in-flight mitigation through postprocessing subtraction to achieve the necessary sensitivity. Past research has demonstrated TTL subtraction in simulations through the estimation of 24 linear coupling coefficients using a noise minimization approach. This paper investigates an approach based on performing rotation maneuvers for estimating coupling coefficients with low uncertainties. In this study, we evaluate the feasibility and optimal configurations of such maneuvers to identify the most efficient solutions. We assess the efficacy of TTL calibration maneuvers by modulating either the spacecraft attitude or the moving optical subassembly yaw angle. We found that sinusoidal signals with amplitudes of around 30 nrad and frequencies near 43 mHz are practical and nearly optimal choices for such modulations. Employing different frequencies generates uncorrelated signals, allowing for multiple maneuvers to be executed simultaneously. Our simulations enable us to estimate the TTL coefficients with precision below 15 μ m / rad ( 1 − σ , in free space) after a total maneuver time of 20 min. The results are compared to the estimation uncertainties that can be achieved without using maneuvers.
DOI: 10.1103/ndwh-vr2y
Authors: Henry Wegener, Sarah Paczkowski, Marie-Sophie Hartig, Martin Hewitson, Gerhard Heinzel, Gudrun Wanner
Language: English
Open Access status: hybrid
OpenAlex ID: W4410630610
FWCI: 1.356
Cites: 16
Cited by: 3
Related to: 10