Work

Enhancing combustion performance of aluminum-water gelled propellants via polyvinylidene fluoride

Year: 2025

Type: article

Abstract: Aluminum–water (Al-H 2 O) propellants represent an innovative class of solid propellants characterized by low cost and minimal signal signature. However, conventional formulations are hindered by significant aluminum (Al) agglomeration, leading to reduced combustion efficiency and substantial residues. This study introduces a method for modifying Al powder with Polyvinylidene Fluoride (PVDF) to enhance the performance of Al-H 2 O propellants by mitigating agglomeration during combustion. Experimental methodologies, including thermogravimetric analysis under ambient-pressure nitrogen atmosphere and laser ignition tests, were employed to investigate the influence of varying PVDF content on the combustion characteristics of the propellants. Furthermore, the effect of PVDF on motor performance was systematically evaluated through laboratory-scale Solid Rocket Motor (SRM) tests. The results demonstrate that the addition of 7.5% PVDF significantly enhanced the burning rate from 1.12 mm/s to 3.78 mm/s and reduced the mean particle size of condensed combustion products from 699 μm to 527 μm. Combustion efficiency rose from 88.57% to 94.51%, while injection efficiency improved significantly from 30.45% to 70.45%. SRM tests further demonstrated an increase in combustion chamber pressure from 0.17 MPa to 0.58 MPa. A dynamic agglomeration model explains these improvements, attributing reduced agglomeration to enhanced aerodynamic forces and a thinner melting layer, while increased gas yield improves injection performance. This study highlights PVDF’s potential in advancing Al-H 2 O propellants by improving combustion and injection efficiency.

Source: Chinese Journal of Aeronautics

DOI: 10.1016/j.cja.2025.103630

Authors: Songchen YUE, Zilong ZHAO, Jiangong ZHAO, Jian JIANG, Peijin LIU, Wen AO

Institutions: Northwestern Polytechnical University, National Center for Nanoscience and Technology

Language: English

Topic: Energetic Materials and Combustion

Subfield: Mechanics of Materials

Field: Engineering

Domain: Physical Sciences

SDG: Affordable and clean energy

Open Access status: hybrid

Estimated APC paid: $2,000