Year: 2025
Type: article
Abstract: Determination of single-valued BH curve and power loss curve of electric steels is an important parameter in the design of electrical machines and transformers. This paper proposes a correction procedure for the measurement of anhysteretic BH curve and power losses, based on the finite element model (FEM) and SST apparatus. A 3D finite element model (FEM) of the SST (Single Sheet Tester) was developed with respect to the IEC 60404-3 standard. The measurement results obtained with a standardized SST apparatus are fed to its FEM and used to iteratively correct initial BH and power loss curves, obtained using magnetic equivalent circuits theory. The proposed iterative correction procedure is based on the steepest descent algorithm, while the stopping criteria were based on the difference between simulated and measured global variables (power loss, induced voltage, and primary current). After correction, root mean squared errors were decreased from 1.85 A/m to 42.88 × 10−3 A/m for the BH curve, and from 44.5 × 10−4 W/kg to 7.28 × 10−4 W/kg for the power loss curve.
Source: Sensors
DOI: 10.3390/s25123813
Authors: Robert Krobot, Martin Dadić
Language: English
Field: Materials Science
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $3,137
Funder: Hrvatska Zaklada za Znanost
OpenAlex ID: W4411416397