Beyond the Light Meter: A Case-Study on HDR-Derived Illuminance Calculations Using a Proxy-Lambertian Surface
Year: 2025
Type: article
Abstract: Accurate illuminance measurements are critical in assessing lighting quality during post-occupancy evaluations, and traditional methods are labor-intensive and time-consuming. This pilot study demonstrates an alternative that combines high dynamic range (HDR) imaging with a low-cost proxy-Lambertian surface to transform image luminance into spatial illuminance. Seven readily available materials were screened for luminance uniformity; the specimen with minimal deviation from Lambertian behavior (≈2%) was adopted as the pseudo-Lambertian surface. Calibrated HDR images of a fluorescent-lit university classroom were acquired with a digital single-lens reflex (DSLR) camera and processed in Photosphere, after which pixel luminance was converted to illuminance via Lambertian approximation. Predicted illuminance values were benchmarked against spectral illuminance meter readings at 42 locations on horizontal work planes, vertical presentation surfaces, and the circulation floor. The average errors were 5.20% for desks and 6.40% for the whiteboard—well below the 10% acceptance threshold for design validation—while the projector-screen and floor measurements exhibited slightly higher discrepancies of 9.90% and 14.40%, respectively. The proposed workflow significantly reduces the cost, complexity, and duration of lighting assessments, presenting a promising tool for streamlined, accurate post-occupancy evaluations. Future work may focus on refining this approach for diverse lighting conditions and complex material interactions.
Source: Buildings
Authors: Jackson Hanus, Arpan Guha, Abdourahim Barry
Institution: University of Cincinnati
Language: English
Subfield: Building and Construction
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $3,137
Funder: University of Cincinnati
OpenAlex ID: W4411453291