Get started
Work

Computational fluid dynamics investigation of CO2 absorption using ionic liquids in hollow-fiber membrane contactors

Year: 2025
Type: article
Abstract: This study integrates computational fluid dynamics (CFD) modeling with previously obtained experimental data to investigate the CO 2 absorption process using hollow fiber membrane contactors (HFMCs) and ionic liquids (ILs). Two types of HFMCs, polysulfone (PS) and polypropylene (PP), were tested in combination with two ILs: [emim][Ac] and [emim][EtSO 4 ]. The CFD models, developed using COMSOL Multiphysics, were validated against laboratory-scale experimental data. A strong correlation between the experimental and simulated results was observed, as indicated by high R 2 values (0.9208 to 0.9844) and low RMSE values (1.4657 to 2.1479), confirming the model's accuracy in representing the actual process. Among the ILs studied, [emim][Ac] showed superior CO 2 absorption efficiency due to its higher CO 2 solubility compared to [emim][EtSO 4 ]. Velocity and concentration profiles of both gas and liquid phases were determined, showcasing the ability of CFD modeling to predict key process parameters across the system geometry. Sensitivity analyses identified the optimal absorption temperature, membrane length, and gas velocity to achieve CO 2 absorption efficiency exceeding 90 %. Results showed that increasing the absorption temperature and membrane length significantly enhances the process performance. Additionally, incorporating shell baffles improved absorption efficiency by approximately 5 %, though it resulted in a notable increase in liquid pressure drop across the shell.
DOI: 10.1016/j.cej.2025.165308
Language: English
Open Access status: hybrid
Estimated APC paid: $4,830
OpenAlex ID: W4411582865
FWCI: 2.109
Cites: 49
Cited by: 7
Related to: 10