Influence of multiscale roughness height in turbulent boundary layers
Year: 2025
Type: article
Abstract: Wind tunnel experiments were conducted under zero pressure gradient conditions using hot-wire anemometry to investigate the influence of the multiscale roughness height effect on turbulent boundary layers at friction Reynolds numbers ranging from 1100 to 4000. The study analysed various rough-wall turbulent statistics to evaluate the effects of uniform and multiscale roughness element size distributions and area coverage. The rough surfaces were designed with an average roughness height of 0.9 mm, constructed from sand grains with three variations of height distribution: (1) uniform size of 0.9 mm, (2) 0.6 mm and 1.2 mm with a 1:1 weight ratio, and (3) 0.6 mm, 0.9 mm, and 1.2 mm with a 1:2:1 weight ratio. These surfaces covered 12%, 25%, 38%, 55%, and 75% of the test section wall area. The study examined the effects of multiscale roughness height on the Hama roughness function and turbulence characteristics. The findings reveal that multiscale roughness height reduces the Hama roughness function, suggesting a mutual sheltering effect among roughness elements. Additionally, the multiscale sand composition with range 0% to 50% of the average roughness height yielded the minimum Hama roughness function at the corresponding roughness area coverage. These results indicate that the application of the Hama roughness function based on equivalent sand-grain roughness might overestimate its value in multiscale roughness cases.
Authors: Setyo Nugroho, Bagus Nugroho, Rey Chin
Institutions: The University of Melbourne, The University of Adelaide
Language: English
Subfield: Computational Mechanics
Field: Engineering
Domain: Physical Sciences
Open Access status: hybrid
Estimated APC paid: $3,420
Award: G8487287006
OpenAlex ID: W4411932185