Work

The effect of gear variations on the wind turbine alternator side on the voltage and electric current generated in a 4-stroke motorcycle

Year: 2025

Type: article

Abstract: In order to be used, hydrogen-electric vehicle fuel must go through a process of separating water molecules and verification (electrolysis) to produce hydrogen and oxygen. Previous research has shown that the voltage and electric current produced in this process tend to be small, thus requiring greater resources. By adding variations in the teeth on the generator side, the voltage and current produced can change, either for the better or for the worse. The method used in this study is the pinion experimental method which was tested at speeds of 40 km/h, 50 km/h, 60 km/h, and 70 km/h. The results of the voltage test show that at a speed of 40 km/h, a voltage of 3.1 V and a current of 0.07 A are produced. At a speed of 50 km/h, the voltage increases to 4.0 V with a current of 0.27 A. At a speed of 60 km/h, a voltage of 4.9 V and a current of 0.36 A are produced, while at a speed of 70 km/h, the voltage reaches 5.9 V with a current of 0.43 A. Based on the average values obtained, the electrolysis process can be carried out because the process requires a minimum voltage of 5.8 V.

Source: BIS Energy and Engineering

DOI: 10.31603/biseeng.362

Authors: Wawan Purwanto, Khoirul Ihsan Yogandi, Bungaran Sinaga, Aroma Ikhwan, Milana Milana, Ahmad Arif

Institution: State University of Padang

Language: English

Topic: Electric and Hybrid Vehicle Technologies

Subfield: Automotive Engineering

Field: Engineering

Domain: Physical Sciences

SDGs: Affordable and clean energy, Industry, innovation and infrastructure

Open Access status: hybrid

Funders: Kementerian Pendidikan, Kebudayaan, Riset, dan Teknologi, Direktorat Jenderal Pendidikan Tinggi, Direktorat Riset dan Pengabdian Masyarakat