Year: 2025
Type: article
Abstract: Arsenic contamination in groundwater is a significant public health concern, with As(III) posing a greater and more challenging risk than As(V) due to its higher toxicity, mobility, and weaker adsorption affinity. Fe-Mn-based adsorbents offer a promising solution, simultaneously oxidizing As(III) to As(V), enhancing its adsorption. This study evaluates an Fe-Mn nanocomposite across typical batch (20 mg of adsorbent), fixed-bed column (28 g), and pilot-scale (2.5 kg) studies, bridging the gap between laboratory and real-world applications. Batch experiments yielded maximum adsorption capacities of 6.25 mg/g and 4.71 mg/g in a synthetic matrix and real groundwater, respectively, demonstrating the impact of the water matrix on adsorption. Operational constraints and competing anions led to a lower capacity in the pilot (0.551 mg/g). Good agreement was observed between the breakthrough curves in the pilot (breakthrough at 475 bed volumes) and the fixed-bed column studies (365-587 bed volumes) under similar empty bed contact times (EBCTs). The Thomas, Adams-Bohart, and Yoon-Nelson models demonstrated that lower flow rates and extended EBCTs significantly enhance arsenic removal efficiency, prolonging the operational lifespan. Our findings demonstrate the necessity of continuous-flow experiments using real contaminated water sources and the importance of optimizing flow conditions, EBCTs, and pre-treatment in order to successfully scale up Fe-Mn-based adsorbents for sustainable arsenic removal.
Source: Nanomaterials
DOI: 10.3390/nano15141104
Institution: University of Novi Sad
Language: English
Subfield: Environmental Chemistry
Field: Environmental Science
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,896
OpenAlex ID: W4412480785