Optimization of Structural Parameters for 304 Stainless Steel Specific Spiral Taps Based on Finite Element Simulation
Year: 2025
Type: article
Abstract: To address the issues of large errors, low accuracy, and time-consuming simulations in finite element (FE) models of tapping processes, which hinder the identification of optimal structural parameters, this study integrates FE simulation with experimental testing to optimize the structural parameters of spiral taps specifically designed for stainless steel. Initially, single-factor experiments were conducted to analyze the influence of mesh parameters on experimental outcomes, leading to the identification of optimal mesh coefficients. Subsequently, the accuracy of the FE tapping simulation model was validated by comparing trends in axial force, torque, and chip morphology between simulations and actual tapping experiments. Orthogonal experimental design combined with entropy weight analysis and range analysis was then employed to conduct FE simulations. The results indicated that the optimal structural parameter combination is a helix angle of 43°, cone angle of 19°, and cutting edge relief amount of 0.18 mm. Finally, based on this combination, optimized spiral taps were manufactured and subjected to comparative performance testing. The results demonstrated significant improvements: the average maximum axial force decreased by 33.22%, average maximum torque decreased by 13.41%, average axial force decreased by 38.22%, and average torque decreased by 24.87%. Error analysis comparing corrected simulation results with actual tapping tests revealed axial force and torque error rates of 5.04% and 0.24%, respectively.
Source: Machines
Authors: Jiajun Pi, Wenqiang Zhang, Hailong Yang
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,896
OpenAlex ID: W4412693740