Work

Thermal and mechanical behaviors of optical silica glass fiber during the drawing process

Year: 2025

Type: article

Abstract: The process of fiber drawing in a vertical furnace is described using the lubrication approximation coupled to heat transfer. The radiative heat transfer is detailed by studying the emitted and absorbed fluxes experimented by the fiber. The emissivity is carefully determined with high spectral resolution. Using a two-band gray absorption coefficients, the Planck average emissivity is overestimated by 24 % in comparison with a high spectral resolution of absorption coefficient. The profile of the heating area is obtained from the experimental data. The steady state lubrication model is solved numerically using a finite difference method. A numerical prediction obtained under certain operating conditions allows a comparison of the fiber radius profiles obtained experimentally and numerically. The convective heat transfer after the neck-down region is needed to control the cooling and the fiber shape. Drawing forces obtained experimentally are compared to numerical results. When the operating temperature is equal to 1950 °Celsius, the agreement is satisfying. The effects of variations in drawing velocity and furnace wall temperature on the relevant operating conditions for adjusting the cooling rate, drawing force, and other variables are numerically studied. • Radiative heat transfer is developed with high spectral resolution. • Glass fiber emissivity is determined as a function of fiber radius. • Lubrication model coupled to heat transfer is solved in steady-state regime. • Fiber radius is well predicted when the convective heat transfer is accounted for.

Source: International Journal of Heat and Mass Transfer

DOI: 10.1016/j.ijheatmasstransfer.2025.127609

Authors: F. Pigeonneau, Z. Lu, M. Ude, W. Blanc