Year: 2025
Type: article
Abstract: The treatment and safe disposal of mining tailings represent one of the main technical and environmental challenges in the contemporary mining industry. The present study aims to evaluate, at laboratory scale, three dewatering techniques applied to phosphate tailings: column thickener, hyperbaric filtration (horizontal filter press), and the direct application of a dewatering polymer. Based on the results obtained and the comparative analysis of Opex and Capex, the application of the dewatering polymer was selected for industrial-scale validation. The tailings sample presented an initial solids concentration of approximately 8.6% with very fine particle size, less than 70 microns. Under the best operating conditions for the aforementioned dewatering techniques, solids percentages by mass were obtained around ≈52% (thickening), ≈75% (filtration), and ≈40% (dewatering polymer). In all techniques, it was possible to obtain turbidity levels in the recovered water below 100 NTU, and a slight increase in the hardness of the overflows and filtrates was observed. According to the yield stress results, it was evident that the tailings were beginning to present characteristics of high-density slurry, paste, and cake with values of 40%, 48%, and 58% solids by mass, respectively.
Source: Materials
DOI: 10.3390/ma18163872
Language: English
Subfield: Civil and Structural Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $3,137
OpenAlex ID: W4413279906