Work

Bond–Slip Properties and Acoustic Emission Characterization Between Steel Rebar and Manufactured Sand Concrete

Year: 2025

Type: article

Abstract: Natural sand (NS) is facing the problem of resource scarcity, while manufactured sand (MS) has become a favorable alternative resource due to its wide range of sources, superior performance, as well as economic and environmental protection. This study adopted MS to replace NS to prepare manufactured sand concrete (MSC). The water–cement ratio, replacement rate of MS, and stone powder content were systematically investigated for the damage evolution of rebar during bond–slip with MSC. Seven groups of specimens were tested using the center pull-out test to analyze the effects of different factors on the bond–slip characteristics (bond stress–slip curve, bond fracture energy, peak stress, and peak slip). Acoustic emission (AE) monitoring was also adopted to synchronously characterize the slip damage process of reinforced MSC. The results indicate that the water–cement ratio and replacement ratio of MS present significant influences on the bond strength of reinforced MSC, in which the smaller the water–cement ratio is, the stronger the bond strength of reinforced concrete. Further, the larger the replacement rate of MS is, the stronger the bond strength of reinforced concrete. The higher the stone powder content, the higher the bond strength, but the effect is small compared to the two variables mentioned above. In terms of AE, count and energy remain at low values in the first and middle stages, followed by larger values, proving that cracks were beginning to develop within the specimen, and then a very large signal and then splitting occurred. The information entropy is relatively stable in the first and middle stages of the test, then fluctuates with the generation of cracks, and finally fluctuates violently and then the specimen splits. The AE parameters are more active with an increasing water–cement ratio, while they are smoother with increases in the replacement rate of MS and stone powder content.

Source: Buildings

DOI: 10.3390/buildings15162959

Authors: Lei Han, Hua Yang, Qifan Wu, Yubo Jiao

Institution: Beijing University of Technology

Language: English

Topic: Structural Behavior of Reinforced Concrete

Subfield: Building and Construction

Field: Engineering

Domain: Physical Sciences

Open Access status: gold

Estimated APC paid: $3,137

Funder: National Natural Science Foundation of China