Work

Synergy Between Zn Current Collector and K + Shielding Additives for High‐Performance Na Plating/Stripping

Year: 2025

Type: article

Abstract: The direct plating/stripping of Na on bare current collectors often results in poor cycling stability and uncontrolled dendrite growth. These two factors significantly hinder the development of high‐energy‐density and fast‐charging energy storage devices. Herein, the synergistic effect between the highly reversible Na plating/stripping on Zn current collectors and a controlled dendrite growth enabled by KPF electrostatic shielding additives is harnessed. A uniform morphology with lower growth/dissolution overpotential is observed for 20 mM KPF additives. The cycle stability enhances from 218 to 376 cycles in the presence of such additives at an areal current density of 0.5 mA cm and capacity of 1.0 mAh cm. Theoretically, a multicomponent phase‐field model is developed to bring insights into the Na electrodeposition in the presence of 0, 5, 10, and 20 mM KPF additives. The model successfully correlates the shield formation and predicts its healing effect on Na dendrites. Further, the effectiveness of the electrostatic shield at high overpotential fails due to the large accumulation of Na ions at the interface. The work strives toward the use of metallic Zn current collectors with electrostatic shielding additives to streamline the cell assembly process.

Source: Batteries & Supercaps

DOI: 10.1002/batt.202500396

Authors: Prakhar Verma, Sanchita Manna, Jayanta Chakraborty, Sreeraj Puravankara

Institution: Indian Institute of Technology Kharagpur

Language: English

Topic: Advanced Battery Materials and Technologies

Subfield: Electrical and Electronic Engineering

Field: Engineering

Domain: Physical Sciences

SDG: Affordable and clean energy

Open Access status: bronze

Funders: Department of Science and Technology, Ministry of Science and Technology, India, Indian Institute of Technology Kharagpur