Work

Influence of Acidic Storage and Simulated Toothbrushing on the Translucency and Color Stability of 3D-Printed Resins for Prosthodontic Applications

Year: 2025

Type: article

Abstract: This study aimed to assess the effect of acidic storage and simulated brushing on the translucency and color stability of 3D-printed resins for prosthodontic applications. Three 3D printed resin materials—Ceramic Crown (CC), OnX (ONX), and Tough 2 (T2)—were compared with a CAD/CAM milled nano-ceramic resin material (Lava Ultimate, LU). Twelve specimens were fabricated from each material and were allocated into two groups based on the storage medium (water or citric acid), followed by simulated tooth brushing for 3650 cycles. The specimens’ translucency (TP) and color stability (ΔE) were determined using a spectrophotometer. The data was compared using ANOVA, independent student t-tests, and a post hoc Tukey test (p < 0.05). Multiple comparisons of mean differences in TP revealed significant differences between the tested materials (p < 0.001), except for groups CC and ONX. Irrespective of the groups, all materials showed decreased TP values after simulated tooth brushing. Regarding color stability, CC (0.66 ± 0.42) and T2 (1.40 ± 0.34) in acid demonstrated the least and greatest color changes, respectively. The ΔE did not vary between the materials or between the storage media (p > 0.05). Except for T2 and LU in water, the other materials showed ΔE values below the perceptibility threshold of 1.2. The material type and storage media affected the translucency of the tested materials. However, regardless of the material type and storage media, there was no discernible impact on the color change of the tested materials.

Source: Materials

DOI: 10.3390/ma18173942