Work

Effect of Biobased and Mineral Additives on the Properties of Recycled Polypropylene Packaging Materials

Year: 2025

Type: article

Abstract: The recycling of polypropylene (PP) packaging films modified with biobased additives: biochar derived from the pyrolysis of natural fibers and diatomaceous earth was investigated. The aim was to assess the impact of these modifiers on the processing, rheological, mechanical, and thermal properties of the recycled material. The processing behavior was evaluated through extrusion with granulation to determine industrial applicability. Rheological properties, including viscosity and melt flow index (MFI), were measured to characterize flow behavior. Mechanical performance was assessed through tensile strength, hardness, three-point bending, and impact resistance tests. Thermal properties were analyzed using thermogravimetric analysis (TGA), Vicat softening temperature (VST), and differential scanning calorimetry (DSC). The results demonstrate that incorporating biochar and diatomaceous earth can modify and, in selected cases, enhance the processing and performance characteristics of recycled PP films, though their impact on thermal behavior is parameter-specific. While diatomaceous earth slightly increased the onset of thermal degradation (T5), both fillers caused a slight decrease in the VST, indicating reduced heat resistance under load. Diatomaceous earth was found to effectively improve stiffness and impact strength, while biochar reduced viscosity and promoted finer crystalline structures. Both additives acted as nucleating agents, increasing crystallization temperatures, with diatomaceous earth additionally delaying thermal degradation onset. These findings highlight the potential of using sustainable, waste-derived additives in polymer recycling, supporting the development of environmentally responsible materials within circular economy frameworks.

Source: Polymers

DOI: 10.3390/polym17172368

Authors: Wiktor Wyderkiewicz, Robert Gogolewski, Justyna Miedzianowska-Masłowska, Konrad Szustakiewicz, Marcin Masłowski

Institutions: Lodz University of Technology, Wrocław University of Science and Technology

Language: English

Topic: Polymer crystallization and properties

Subfield: Polymers and Plastics

Field: Materials Science

Domain: Physical Sciences

SDG: Responsible consumption and production

Open Access status: gold

Estimated APC paid: $3,258