Work

Polyacrylonitrile/Polyimide Hybrid Nanofiber Separator for Energy-Dense Aqueous Zinc-Ion Batteries

Year: 2025

Type: article

Abstract: Aqueous zinc-ion batteries (AZIBs) have gained significant attention for large-scale energy storage due to their high safety, environmental friendliness, and cost-effectiveness. However, the lack of high-performance separators remains a major obstacle to their commercialization. In this study, a composite nanofiber membrane composed of polyacrylonitrile (PAN) and polyimide (PI) is fabricated via electrospinning. The PAN/PI composite nanofiber membrane (63 μm-thick) exhibits an average fiber diameter of 431.2 nm, a porosity of 83.9%, an elastic modulus of 24.65 MPa, and a high Zn 2+ transference number of 0.68. It significantly enhances the cycling stability of zinc-based batteries. Zinc symmetric cells (Zn||Zn) maintain a long cycle life of 2750 h at a current density of 1 mA cm –2 and a capacity of 1 mAh cm –2 . Zinc–copper asymmetric cells (Zn||Cu) retain an average Coulombic efficiency of 99.3% after 701 cycles. When paired with a Zn x V 2 O 5 (ZVO) cathode, the Zn||ZVO full cell delivers an initial specific capacity of 204.7 mAh g –1 at 5 A g –1 and retain 86.9% of their capacity after 1000 cycles. Furthermore, at a discharge current of 0.5 A g –1, the full cell achieves an energy density of 25.95 Wh L –1, approximately six times higher than that of conventional glass fiber separator systems.

Source: ACS Applied Materials & Interfaces

DOI: 10.1021/acsami.5c12089