Work

Preparation of a supramolecular sand-inhibiting and water-control agent and study of its applicability to oil reservoirs

Year: 2025

Type: article

Abstract: To solve the problem whereby an oil reservoir with applicable boundaries of the current sand-inhibiting and water-control agent is unclear, a supramolecular sand-inhibiting and water-control agent PDKM was prepared using acrylamide (AM), methacryloxyethyltrimethyl ammonium chloride (DMC), styrene (SM), and γ-methacryloyloxypropyltrimethoxysilane (KH570) as comonomers. The molecular structure of PDKM was verified by 1 H-NMR and FT-IR. On the basis of establishing an evaluation method that can screen the performance of sand-inhibiting agent at a flow rate of 100 mL/min, the oil reservoir applicable boundaries of PDKM were obtained through the evaluation of sand-inhibiting and water-control performance. The experimental results show that when the concentration of PDKM is 5000 mg/L, the oil reservoir conditions are temperature ≤ 90°C, formation water salinity ≤ 21249 mg/L, the degree of sand production corresponding to slight sand production and particle migration, crude oil viscosity ≤ 50 mPa•s, primary water flooding water cut ≥ 75%, and formation permeability contrast ≤ 2. The performance with respect to sand inhibiting and water control can all reach an excellent level. Therefore, the PDKM solves the problem whereby the applicability of the current sand-inhibiting and water-control agent is unclear, and provides direction for the selection of suitable products in the oilfield production site.

Source: Petroleum

DOI: 10.1016/j.petlm.2025.09.003