Work

An energy-efficient D-latch architecture with feedforward technique for high-speed applications

Year: 2025

Type: article

Abstract: This work presents a novel delay-optimized D-latch architecture that enhances speed performance through the introduction of additional parallel discharge paths at the output node. A Path Enable Block (PEB), placed at the output and controlled by both the clock and feedforward data signal ( D ), selectively activates these discharge paths during critical transitions. The optimal number of parallel paths ( N ) is determined based on the load capacitance to ensure minimal delay with controlled power overhead. The proposed architecture is first implemented in 180 nm CMOS technology using Cadence Virtuoso at a supply voltage of 1.8 V, achieving a D-to-Q delay of 0.291 ns and a Power Delay Product (PDP) of 17.67 fJ for a 50 fF load with N =6. Furthermore, the proposed latch supports a maximum operating frequency of 1.6 GHz under a 50 fF load, making it well-suited for integration in high-speed, energy-efficient systems such as IoT devices, wearable electronics, and low-power digital processors. To evaluate scalability and energy efficiency in advanced nodes, the same design is implemented in 45 nm technology with a supply voltage of 1.2 V, where the delay is further reduced to 0.221 ns with a significantly lower PDP of 4.08 fJ. Notably, simulations were also performed at a fixed V D D of 1.8 V across both nodes to isolate the impact of architectural enhancements from supply voltage scaling. Results confirm that the observed improvements stem from the proposed circuit technique itself, independent of V D D reduction. • Proposes a Feedforward-Based D-Latch Design for Enhanced Speed. • Implemented in 180nm CMOS at 1.8 V using Cadence tools. • Proposed design shows lower PDP than conventional designs. • Eliminates buffer need at high load output node.

Source: Results in Engineering

DOI: 10.1016/j.rineng.2025.107301

Authors: R. Rakhi, R.K. Siddharth, K.G. Shreeharsha, M.H. Vasantha, Y.B. Nithin Kumar

Institutions: National Institute of Technology Goa, Manipal Academy of Higher Education

Language: English

Topic: Low-power high-performance VLSI design

Subfield: Electrical and Electronic Engineering

Field: Engineering

Domain: Physical Sciences

SDG: Industry, innovation and infrastructure

Open Access status: gold

Estimated APC paid: $1,940