Additively manufactured copper surfaces with porous microfeatures for enhanced pool boiling performance
Year: 2025
Type: article
Abstract: This study evaluates pool boiling on additively manufactured copper surfaces with various microstructures, using distilled water under saturated atmospheric conditions. Initially, heat-treated and untreated samples were compared to assess thermal conductivity effects. Heat-treated samples, despite higher thermal conductivity, generally showed lower heat transfer coefficients (HTC) due to smoother surfaces and fewer active nucleation sites. Further testing involved heat-treated surfaces with channels, tunnels, chimneys, and pillars of varying heights, benchmarked against a flat surface. Chimney structures achieved the highest enhancements, surpassing 3000 kW m −2 in maximum heat flux and an HTC of 260 kW m −2 K −1 , which is a 400 % improvement compared to the reference. Their superior performance resulted from efficient liquid-vapor separation, capillary wicking, and favorable bubble dynamics facilitated by their geometry. Pillar structures significantly enhanced critical heat flux but had limited HTC due to vapor entrapment and bubble coalescence. In contrast, chimney features provided balanced boiling performance across diverse heat fluxes. Overall, this study demonstrates the promise of laser powder bed fusion to create advanced copper surfaces for effective thermal management applications, particularly in systems demanding high heat dissipation, minimal surface superheat, and complex geometries. • Additive manufacturing enabled efficient vapor-liquid separation via custom geometries. • Chimney microfeatures achieved a 400 % heat transfer coefficient enhancement. • Heat-treated copper surfaces enhanced CHF up to 3065 kW·m-2 in boiling experiments. • Pillar geometries improved CHF but limited HTC due to vapor entrapment. • Study reveals structure-specific design guidelines for boiling heat transfer optimization.
Authors: Tadej Bregar, Armin Hadžić, John Robinson, Alexandros Askounis, Matevž Zupančič, Iztok Golobič
Institutions: University of Ljubljana, University of Wolverhampton
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: hybrid
Estimated APC paid: $3,920
OpenAlex ID: W4414445236