Insight into the Crack Evolution Characteristics Around the Ridged PDC Cutter During Rock Breaking Based on the Finite–Discrete Element Method
Year: 2025
Type: article
Abstract: The ridged cutter, a highly representative non-planar PDC cutter known for its strong impact resistance and wear durability, has demonstrated significant effectiveness in enhancing the rate of penetration (ROP) in hard, highly abrasive, and interbedded soft–hard formations. Understanding the crack evolution is fundamental to revealing the rock-breaking mechanism of ridged PDC cutters. To date, studies on rock breaking with ridged cutters have largely focused on macroscopic experimental observations, lacking an in-depth understanding of the crack evolution characteristics during the rock fragmentation process. This study employs the Finite–Discrete Element Method (FDEM) to establish a three-dimensional numerical model for simulating the interaction between the ridged cutter and the rock. By analyzing crack propagation paths, stress distribution, and the stiffness degradation factor (SDEG), the initiation, propagation patterns, and sequence of cracks around the cutter are investigated. The results indicate the following outcomes: (1) The ridged cutter breaks rock mainly by tensioning and shearing, while the conventional planar cutter breaks the rock by shearing. (2) The rock-breaking process proceeds in three stages: compaction, micro-failure, and volumetric fragmentation. (3) Crack evolution around the cutter follows the rule of “tension-initiated and shear-propagation”; that is, tensile damage first generates at the front of the crack due to tensile stress concentration, whereas shear damage subsequently occurs at the rear under high shear stress. Finally, mixed tensile–shear macro-cracks are generated. (4) The spatial distribution of cracks exhibits strong regional heterogeneity. The zone ahead of the cutter contains mixed tensile–shear cracks, forming upward-concave cracks, horizontal cracks, and oblique cracks at 45°. The sub-cutter zone is dominated by tensile cracks; the zone on the flank side of the cutter consists of a radial stress field, accompanied by oblique 45° cracks. The synergistic evolution mechanism and distribution law of tensile–shear cracks revealed in this study elucidate the rock-breaking advantages of ridged cutters from a micro-crack perspective and provide a theoretical basis for optimizing non-planar cutter structures to achieve more efficient volumetric fracture.
Source: Processes
DOI: 10.3390/pr13103039
Authors: Jianxun Liu, Taixue Hu, Xikun Ma, Chengbin Mei, Chaoqun Dong
Institution: Chongqing University of Science and Technology
Language: English
Topic: Tunneling and Rock Mechanics
Subfield: Civil and Structural Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,896
OpenAlex ID: W4414476719