Work

Crystallization effect in the self-bias response of several Fe-rich magnetoelastic alloys

Year: 2025

Type: article

Abstract: This work investigates the self-bias effect in thermally annealed Fe-based magnetoelastic sensors, extending previous findings on Vitrovac® 7600 to compositions designed for enhanced corrosion resistance. The alloys FeNiCrSiB, FeCoSiB, and Metglas were selected to evaluate the influence of annealing-induced crystallization on their magnetic, magnetoelastic, structural, and electrochemical properties, with a focus on their suitability for operation in harsh environments. The results reveal that thermal treatment at 500 °C resulted in partial crystallization, as confirmed by X-ray diffraction and Mössbauer spectroscopy, yielding a dual-phase structure composed of crystalline and amorphous regions. In addition, all treated samples exhibited stable and clearly detectable self-bias magnetoelastic resonances after one month, as well as significant improvements in quality factor (up to 1050 for the FeCoSiB alloy) and frequency stability over time (maximum deviation down to 6 and 12 Hz for the Metglas and FeCoSiB sensors, respectively). Further, while thermal annealing adversely affected the corrosion resistance of V7600 and FeCoSiB (increase in the corrosion rate of 76 % and 660 %, respectively), it preserved the stability of Metglas and substantially improved the performance of FeNiCrSiB (55 % reduction in corrosion rate). These results highlight the potential of Cr- and Ni-enriched Fe-based alloys as suitable candidates for self-bias magnetoelastic sensor platforms to be employed in harsh environments. • Self-bias magnetoelastic resonance was achieved in Fe-based alloys via thermal annealing. • Crystalline–amorphous dual-phase structures enable stable magnetoelastic response without external bias fields. • Cr- and Ni-rich alloys demonstrated improved or preserved corrosion resistance after annealing. • Enhanced quality factor and frequency stability were observed across all crystallized sensors. • FeNiCrSiB emerges as a promising self-biased sensor for operation in aggressive environments.

Source: Journal of Alloys and Compounds

DOI: 10.1016/j.jallcom.2025.184229