Work

The Removal of Azoles from an Aqueous Solution by Adsorption on Nature-Derived and Waste Materials

Year: 2025
Type: article
Abstract: The objective of this study was to investigate the adsorption of 11 azoles (tebuconazole, ketoconazole, econazole, miconazole, fluconazole, clotrimazole, climbazole, flutriafol, epoxiconazole, tiabendazole, and imazalil) on natural and waste-derived sorbents such as ceramsite, perlite, pumice, sawdust, coconut fibers, heavy oil fly ash (HOFA), activated carbon, and silica gel. The results of adsorption efficiency for most sorbents varied depending on the azole compounds and their concentration. The highest adsorption for all tested compounds was obtained for activated carbon and heavy oil fly ash, reaching about 100% in both tested concentrations (0.2 mg L−1 and 0.02 mg L−1). The HOFA material was characterized in terms of elemental analysis (CHNS), confirming the elemental contents of 52% C, 0.65% H, 0.4% N, and 2.3% S. The specific surface area of HOFA was 11.2 m2 g−1, and scanning electron microscopy (SEM) results showed the spherical yet porous nature of the particles. Furthermore, the calculated adsorption isotherms demonstrated that for most tested azoles, the Dubinin–Radushkevich (D-R) isotherm best fits the data, with R2 = 0.93 or more, which is characteristic of porous carbon materials. The results highlight the significant potential of the tested HOFA sorbent for effectively removing azoles, as the tests performed showed that it was possible to remove these compounds with a concentration of up to 0.2 mg L−1 within an hour. This is particularly important because HOFA is an easily accessible waste material. Furthermore, the adsorption of azoles will not increase the cost of HOFA disposal when using the standard procedures currently applied to this waste.
Source: Processes
Language: English
Open Access status: gold
Estimated APC paid: $2,896
OpenAlex ID: W4415008502
FWCI:
Cites: 69
Cited by:
Related to: