Influence of Fe2O3 Nanoparticle-infused Waste Cooking Oil Biodiesel on the Emission, Performance, and Combustion Aspects towards a Cleaner Environment
Year: 2025
Type: article
Abstract: In the present experimental investigation, Waste cooking oil (WCO) biodiesel was prepared by employing a single-stage transesterification technique using 2.1 grams of NaOH and 65 ml of methanol at a molar ratio of 1:8, at 60 °C for a 75-minute reaction duration, yielding 11.75 liters of WCO biodiesel. Fe2O3 nanofluid was prepared using the ultrasonication technique at 60 Hz and 600 rpm for 45 minutes, using deionized ethanol and Sorbitan monooleate solution. The physicochemical properties, including kinematic viscosity, density, calorific value, flash point and fire point, ash content, and cetane index, were found to be within ASTM limits. SEM and stability analyses on Fe2O3-suspended diesel-WCO biodiesel blend were also conducted. The test fuel blends of D70WCOB30 and D70WCOB30 with 50 ppm, 100 ppm, and 150 ppm of Fe2O3 nanoparticles were prepared separately and tested in a CI engine. The performance test clearly showed that D70WCOB30 Fe2O3 NP100 (80% of diesel and 20% of WCOB with Fe2O3 nanoparticle doping at 100 ppm) fuel blend produced superior Brake Thermal Efficiency (BTE) and lower Brake Specific Fuel Consumption (BSFC) due to higher calorific value. D70WCOB30 Fe2O3 NP100 emitted lower amounts of Unburned Hydrocarbon (UBHC) and CO, whereas the NOx emissions were notably higher. Lower smoke emissions were seen in a diesel-biodiesel blend with a 50-ppm nanoparticle concentration. The combustion characteristics, including in-cylinder pressure and heat release rate, were positively influenced by the addition of nanoparticles. Overall, the D70WCOB30 Fe2O3 NP100 fuel can be used in an unmodified CI engine as a sustainable alternative.
Authors: J. Allen Jeffrey, S. Govindaraj, R. Mahesh, A. Bhaskar, K. Arunkumar, R. Edwin Joseph, V. Hariram, V. Punitharaj, S. Sarathipriyan
Language: English
Subfield: Biomedical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: hybrid
OpenAlex ID: W4415091963