Work

Data-Driven Multi-Objective Optimization Design of Micro-Textured Wet Friction Pair

Year: 2025

Type: article

Abstract: Friction pairs in heavy-duty power-shift tractor wet clutches operate under complex conditions, making them vulnerable to damage and reducing reliability. Optimizing their tribological performance requires a trade-off between a high coefficient of friction (COF) for torque transmission and a low temperature rise (∆T) to prevent thermal damage. Surface texturing is an effective method for improving the tribological performance of friction pairs. This study simulated the friction of wet clutch pairs via pin-on-disk tests and designed micro-textures on the pin surface to enhance tribological performance. Based on the experimental data, a Gaussian Process Regression (GPR) surrogate model was developed to accurately predict COF and ∆T as a function of the clutch’s operating and micro-texture’s geometric parameters. A Multi-Objective Particle Swarm Optimization (MOPSO) algorithm was then employed to obtain the optimal set of solutions. The obtained pareto front clearly revealed the COF–temperature rise trade-off. From the optimal solution set, optimal micro-texture parameters for two typical operating conditions of different clutches were extracted. Compared with the untextured surface, the optimal solutions increased COF by 2.6%/1.2% and reduced ∆T by 39.2%/12.1%. Relative to neighboring experimental points, COF further increased by 11.3%/2.7% and ∆T decreased by 16.6%/1.7%. This work establishes a method for balancing the frictional and thermal performance of friction pairs.

Source: Agriculture

DOI: 10.3390/agriculture15202152