Bubble dynamics and rupture in carbonated water droplet on hydrophobic surface
Year: 2025
Type: article
Abstract: • Texture topology on hydrophobized surface acts like nucleation sites for bubble formation. • Bubbles emanated from hydrophobized surface coalesce in droplet fluid and forms large bubble in droplet top section. • Bubble film thinning under gravity is more pronounced than surface evaporation. • Initial bubble film thickness is estimated as ∼ 9 µm and it bursts once film thickness reduces to ∼ 30 nm. • Jet height formulation is amended via including work done by recoil pressure on bubble cavity. • Jet velocity and jet height reduces with increasing droplet size. Carbonated water droplets have significant potential for self-cleaning of hydrophobic surfaces since the dissolution of CO₂ gas can generate bubbles reducing interfacial shear and propelling droplets. The effective droplet control depends on the dynamics of bubble formation, coalescence, and rupture during self-cleaning. CO₂ bubbles generated and released from droplet interface at the hydrophobic surface accumulate at droplet apex region and form a foam-like structure. As bubble film reaches a critical thickness, it ruptures as a result of force imbalance between interfacial tension and gas pressure. A film retraction and formation of vertical jet (Worthington jet) occur following the rupture, which creates a complicated droplet behavior on hydrophobic surface. Consequently, the present study investigates bubble formation, coalescence, and rupture within the carbonated water droplets. Bubble velocity in droplet interior is formulated using Epstein-Plesset relation and it is also measured by using high-speed recording facility. Film thickness and jet velocity are formulated incorporating the force balance. We have shown that bubble buoyancy force ( ∼ 0.41 × 10 -7 N) is greater than the drag force ( ∼ 2.23 × 10 -8 N) and the force of gravity ( ∼ 0.43 × 10 -10 N). Since discrepancies are observed between predictions and measured data, equation developed for jet velocity is further modified to include the effect of recoil pressure. After the modifications, jet velocity takes the form V j = γ ( 1 + C n π − O h ) ρ g R b − b , C n being the correction factor and it varies within 0.1 to 0.05 based on the experimental data, i.e. C n = 0.1 for R b − b R d ≤ 0.15 ) and C n = 0.05 (for 0.15 < R b − b R d ≤ 0.19 ). The proposed amendments notably improve the agreement between predicted and experimentally observed jet velocities.
Source: Results in Engineering
Institution: King Fahd University of Petroleum and Minerals
Language: English
Subfield: Computational Mechanics
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $1,940
OpenAlex ID: W4415388650