Work

Dynamic Response and Damage Analysis of Variable Section Pile Group Foundation at Liquefaction Site Under Different Seismic Intensities

Year: 2025

Type: article

Abstract: Liquefaction-induced failure of pile foundations remains a critical challenge in seismic bridge engineering, particularly for large-diameter variable-section piles widely used in deep foundations. To address the limited understanding of their dynamic behavior in liquefiable soils, this study conducted large-scale shaking table tests on single and group pile foundations at the Xiang’an Bridge site in Xiamen. The model reproduced a stratified saturated sandy soil profile to examine pore pressure evolution, acceleration response, horizontal displacement, and bending moment under seismic intensities of 0.15 g, 0.25 g, 0.35 g, and 0.45 g. The experimental results validated the model’s reliability and revealed clear performance distinctions between the two pile types. As seismic intensity increased, the stable pore pressure ratio rose from 0.72 to 0.86, indicating progressive liquefaction. Compared with the single pile, the pile group exhibited 15–25% lower peak acceleration and displacement, and a delayed occurrence of maximum response by about 1.3 s. Damage occurred at 0.35 g for the single pile but only at 0.45 g for the pile group, accompanied by a more minor reduction in fundamental frequency (32.44% vs. 52.90%). These results demonstrate that the pile group effect mitigates the impact of liquefaction and enhances seismic resistance. The study provides experimental validation and quantitative insight into the dynamic response mechanisms of variable-section pile group foundations, contributing novel guidance for the seismic design of bridge foundations in liquefaction-prone regions.

Source: Buildings

DOI: 10.3390/buildings15213840