Work

Determination of the Bending and Shear Properties of Wood-Based Materials Using the TIMOSHENKO Beam Theory

Year: 2025

Type: article

Abstract: Wood-based materials in the form of wood veneer composites (WVC) possess a high lightweight construction potential for load-bearing applications in mechanical engineering due to their high strength properties combined with low density. However, in order to substitute energy-intensive metallic construction materials (such as steel or aluminum), additional structural space is required to compensate for the comparatively low stiffness by means of the area moment of inertia. Under bending loads, an increase in cross-sectional height at a constant span length leads to elevated shear stresses. Owing to the low shear strength and stiffness of wood-based materials, the influence of shear stresses must be considered in both the design of wooden components and in material testing. Current standards for determining the bending properties of wood-based materials only describe methods for assessing pure bending behavior, without accounting for shear effects. The present contribution introduces a method for determining both bending and shear properties of WVC using the three-point bending test. This approach allows the derivation of bending and shear modulus values through an analytical model based on Timoshenko beam theory by testing various span-to-height ratios. These modulus values represent material constants and enable the numerical design of wooden components for arbitrary geometric parameters.

Source: Forests

DOI: 10.3390/f16111630

Authors: Patrick Kluge, Sven Eichhorn

Institution: Chemnitz University of Technology

Language: English

Topic: Wood Treatment and Properties

Subfield: Building and Construction

Field: Engineering

Domain: Physical Sciences

Open Access status: gold

Estimated APC paid: $3,137