Work

A Study on the Basic Properties of Oil Shale and Its Oxidative Pyrolysis Kinetic Characteristics in an Air Atmosphere

Year: 2025

Type: article

Abstract: The in situ conversion of oil shale with air injection has the advantage of self-generated heat. The fragmentation degree of oil shale affects the oxidative pyrolysis process. In this paper, the basic properties of oil shale were analyzed, and weight loss observation and high-pressure TGA-DSC (thermogravimetric analysis and differential scanning calorimetry) tests in an air atmosphere were conducted using the cores and particles. The oil shale’s oxidative pyrolysis characteristics and the effect of its particle sizes were evaluated. The results show that the porosity and permeability conditions, TOC (total organic carbon), and inorganic mineral composition of oil shale are highly heterogeneous, with higher permeability and greater TOC along the bedding direction. The derivative of the TGA curve shows a single peak, and the heat flow curve shows a double peak that can be used to determine the oil shale’s oxidation type. The oxidative pyrolysis stage of organic matter can be divided into three temperature ranges, of which the medium temperature range is where the most combustion weight loss and heat release occurs. The activation energy of oxidative pyrolysis, which is affected by factors such as particle size, organic matter content, and pyrolysis temperature, is 46.92–248.11 kJ/mol, indicating the varying degrees of difficulty in initiating the reaction under different conditions. The pre-exponential factor is 3.15 × 102–6.27 × 1011 1/s, and the enthalpy value is 2.575–4.045 kJ/g. The combustion indexes and reaction enthalpy under different particle sizes are more correlated with their own organic matter content. As oil shale particle size decreases, the variation law of the activation energy and pre-exponential factor changes with temperature from an initial continuous increase to a decrease, then increases again with the smallest kinetic parameters in the medium temperature zone. A small particle size, high organic matter content, and high pressure are more conducive to initiating the oxidative pyrolysis reaction to achieve in situ conversion of organic matter.

Source: Processes

DOI: 10.3390/pr13113431