Work

Finite Element Analysis of Shaft Excavation Stability Using Raise Boring Machine (RBM) Method in Karst Strata with Multiple Cavities

Year: 2025

Type: article

Abstract: This study investigates the excavation stability of vertical shafts using the Raise Boring Machine (RBM) method in karst strata with multiple cavities, based on the ventilation shaft project of the Zimuyan Tunnel along the Wudao Expressway. A three-dimensional numerical model was established using ABAQUS (version 6.14) to simulate the RBM excavation process and to analyze the effects of cavity positions and depths on the stability of the surrounding rock during excavation. The results show that (1) when the cavities are located at the same position and depth, the radial displacement of the surrounding rock during the reverse reaming stage is reduced by approximately 60% on average compared to that during the forward reaming stage, and the radial stress is also significantly lower during the reverse reaming process; (2) when the cavities are at the same depth, symmetrically distributed cavities cause the surrounding rock displacement to increase by 15–20% compared to vertically aligned cavities, and the stress distribution becomes more complex; and (3) when the cavities are at the same horizontal position but located on different planes, the stability of the surrounding rock improves as the distance between the two cavities increases.

Source: Buildings

DOI: 10.3390/buildings15213842

Authors: Yongqiao Fang, Guofeng Wang, Kaifu Ren, Fayi Deng, Haiyan Xu

Institution: Sichuan Agricultural University

Language: English

Topic: Geomechanics and Mining Engineering

Subfield: Mechanics of Materials

Field: Engineering

Domain: Physical Sciences

Open Access status: gold

Estimated APC paid: $3,137

Funder: U.S. Department of Transportation