Investigation of hot-spot-induced pre-ignition in methanol- and hydrogen-fueled spark-ignition engines
Year: 2025
Type: article
Abstract: The transition of the transport sector towards more sustainable propulsion requires the adoption of alternative fuels. Methanol and hydrogen are promising options because of their possible renewable production pathways, low to zero carbon content, low pollutant emission, and potential for reaching higher thermal efficiencies. A drawback is that hydrogen and methanol are more prone to hot-spot-induced pre-ignition (PI) due to their lower minimum ignition energy compared to conventional fuels. Hot-spot-induced PI can occur in engines due to hot surfaces acting as ignition points, which is a limiting factor for operation, safety and efficiency. Although undesirable in spark ignition engines (SI), hot-spot-induced ignition can facilitate the use of low-cetane fuels such as methanol and hydrogen in compression ignition engines (CI). Understanding the effects leading to hot-spot-induced pre-ignition is essential for both suppressing the phenomenon in SI engines and leveraging it in CI engines. This study investigates hot-spot-induced PI phenomena using an SI single-cylinder research engine featuring a prototype glow-plug equipped with an integrated thermocouple in order to create a controlled hot spot inside the combustion chamber. Methanol has been introduced in the combustion chamber with a direct injection (DI), while hydrogen with a port fuel injector (PFI). A parametric study was conducted using methanol and hydrogen to identify dependencies of PI events linked to certain engine operating parameters. A comprehensive data analysis featuring 3D Reynolds averaged Navier Stokes (RANS) and chemical kinetics simulations were conducted to explain the main mechanisms responsible for PI. Generally, hydrogen requires a higher hot-spot temperature to achieve pre-ignition compared to methanol. For methanol, this study provides insights into the dependencies of various parameters on the ignition timing in CI applications, allowing potentially to achieve a controllable CI combustion with glow-plug assistance. An important finding is that while methanol combustion can be effectively controlled through glow-plug temperature, the study demonstrates that such controllability is more challenging for hydrogen. Indeed, numerous parameters influencing hot-spot-induced ignition were identified. In particular, the local mixture composition near the glow-plug and elevated pressures were found to significantly impact the onset of PI, with higher pressures effectively suppressing pre-ignition. This counterintuitive behavior is explained by the inverse pressure dependence of ignition delay times for hydrogen and analyzed with reaction pathway analysis. Overall, it was observed that by adjusting the operating parameters, the potential hot-spot temperature required to trigger PI could be optimized, allowing for an increase of up to 100 K . These insights are essential for developing strategies to control or prevent PI in order to enable a safer and more efficient use of methanol and hydrogen in future engines. This experimental study provides a solid dataset for future work and validation of numerical models.
Institutions: RWTH Aachen University, University of Bath, Ford (Germany)
Language: English
Subfield: Fluid Flow and Transfer Processes
Field: Chemical Engineering
Domain: Physical Sciences
Keywords: methanol, hydrogen, spark ignition engine, glow plug, hot spot ignition, direct injection, port fuel injection, ignition delay, low cetane fuels, compression ignition, alternative fuels, reaction pathway analysis, ignition timing control, low-temperature combustion, RANS simulation, chemical kinetics simulation
Open Access status: hybrid
Estimated APC paid: $3,570
OpenAlex ID: W4415757844
