Work

A Novel Rapid Detection Method for Bridge Vibration Based on an Unmanned Aerial Vehicle and a Raspberry Pi

Year: 2025

Type: article

Abstract: The high cost of traditional structural health monitoring systems limits their application to only a few major bridges, leaving most structures unmonitored between manual inspections. To address this issue, this study proposes a UAV mobile detection device (UMD) system that integrates a Raspberry Pi, data acquisition module, and accelerometer for rapid, contact-based vibration measurement. A vibration transmission model between the UMD and the bridge deck is developed to guide hardware design and quantify the influence of isolator stiffness and damping. The UMD’s performance is validated through both laboratory floor tests and field bridge experiments, demonstrating reliable identification of modal frequencies in the range of 0.00–51.95 Hz with a maximum acceleration error below 0.01 g and a relative modal frequency deviation within 3.4%. The analysis further determines that an accelerometer resolution of 0.02×10−1 g is required for accurate frequency domain measurement. These findings establish the UMD as a fast, low-cost, and accurate tool for rapid bridge vibration assessment and lay the groundwork for future multi-UAV synchronized monitoring.

Source: Vibration

DOI: 10.3390/vibration8040069

Authors: Liang Huang, Kang Li, Jinke Li, Panjie Li, Can Cui, Pengfei Zheng

Institution: Zhengzhou University

Language: English

Topic: Structural Health Monitoring Techniques

Subfield: Civil and Structural Engineering

Field: Engineering

Domain: Physical Sciences

SDG: Industry, innovation and infrastructure

Open Access status: gold

Estimated APC paid: $1,930