Work

FLAC3D Modeling of Shear Failure and Fracture of Anchor Bolts in Surrounding Rock: A Study on Stress-Bearing Ring Reinforcement

Year: 2025

Type: article

Abstract: To address the challenge of simulating shear failure in anchor bolts within FLAC3D, a shear failure criterion, Fs(i) ≥ Fsmax(i), is proposed based on the PILE structural element. Through secondary development using the FISH programming language, a modified mechanical model of the PILE element is established and integrated into the FLAC3D-FISH framework. Comparative analyses are conducted on shear tests of bolt shafts and on anchor bolt support performance under coal–rock interface slip conditions, using both the original PILE model and the modified mechanical model. The results demonstrate that the shear load–displacement curve of the modified PILE model clearly reflects shear failure characteristics, satisfying a quantitative shear failure criterion. Upon failure, both the shear force and axial force of the structural element at the failure point drop abruptly to zero, enabling effective simulation of shear failure in anchor bolts within the FLAC3D environment. Using the modified model, the distribution of principal stress differences in the surrounding rock after roadway excavation is analyzed. Based on this, the concept of a stress-bearing ring in the surrounding rock is introduced. The reinforcing effects of bolt length, spacing, and ultimate load capacity on the stress-bearing ring in weak and fractured surrounding rock are investigated. The findings reveal that: (1) shear failure initiates in bolt shafts near the coal–rock interfaces, occurring earlier near the coal–floor interface than near the coal–roof interface; (2) the stress-bearing ring in weak and fractured surrounding rock shows a discontinuous and uneven distribution. However, with support improvements—such as increasing bolt length, reducing spacing, and enhancing failure load—the surrounding rock gradually forms a continuous stress-bearing ring with more uniform thickness and stress distribution, migrating inward toward the roadway surface.

Source: Symmetry

DOI: 10.3390/sym17111885

Authors: Rui Wang, Weiguang Zhang, Jianbiao Bai, Haosen Wang, Qiang Zhang

Institutions: Xinjiang Institute of Engineering, China University of Mining and Technology, Xinjiang University

Language: English

Topic: Geomechanics and Mining Engineering

Subfield: Mechanics of Materials

Field: Engineering

Domain: Physical Sciences

Open Access status: gold

Estimated APC paid: $2,896

Funders: Natural Science Foundation of Xinjiang Province, National Key Research and Development Program of China