Work

Assessing the Performance of a Cascaded Composite Phase Change Material Roadway Cooling System Against Heat Hazard from Sustainable Mine Geothermal Energy

Year: 2025

Type: article

Abstract: Sustainable mine geothermal energy causes high-temperature hazards in mine roadways, severely endangering miners’ lives. There is an urgent need to enhance research on the performance of composite phase change material (CPCM) roadway cooling systems, as they can effectively control ambient temperatures. However, existing research on CPCM roadway cooling system performance remains limited. This study innovatively establishes a numerical model for a novel cascade CPCM roadway cooling system and employs the control variable method to investigate the influence of multi-parameter regulation on system performance. The study reveals that the ring pipe radius ratio significantly impacts the system’s heat exchange efficiency and temperature distribution. The optimal comprehensive system performance is achieved at an annular tube radius ratio of 2:3, where the CPCM solid phase percentage for 89.03% and the average temperature of the monitoring surface decreases by 9.54 °C. Increasing the cascaded tube spacing enhances the overall cooling effect, but cooling efficiency diminishes when the spacing exceeds 0.5 m. The CPCM phase change temperature must align with the mine’s geothermal conditions, with CPCM utilization and cooling efficiency peaking at 25 °C. The air deflector structure effectively mitigates cooling lag in the lower roadway section. At an installation angle of 30°, the expansion distance of the lower low-temperature zone increased by up to 48.89% without compromising cooling efficiency in the upper roadway section, while also delaying the recovery rate of heat damage.

Source: Applied Sciences

DOI: 10.3390/app152211850