Work

Model predictive control of pressure-swing distillation via closed-loop system identification

Year: 2025

Type: article

Abstract: Pressure-swing distillation (PSD) is a proven technique for separating azeotropic mixtures by exploiting pressure-dependent shifts in azeotropic composition. Despite its efficacy, PSD systems present significant control challenges due to inherent nonlinearities, complex multivariable interactions, and internal recycle loops. This study proposes a model predictive control (MPC) framework for PSD systems, founded on closed-loop system identification. A comprehensive plantwide nonlinear dynamic model of a PSD process for separating a maximum-boiling azeotrope of acetone and chloroform is developed using Aspen Dynamics and interfaced with MATLAB/Simulink for controller design and testing. To address the limitations of open-loop excitation in systems with recycles, pseudo-random binary sequence (PRBS) signals are applied under closed-loop operation to sufficiently excite the process. Subsequently, linear state-space models are identified using the prediction error method. Based on these models, two MPC configurations are developed: temperature control (TC) and composition–temperature cascade control (CC–TC). Simulation results demonstrate that the proposed MPC strategies quantitatively outperform proportional–integral (PI) controllers. Specifically, under the TC strategy, the total integral of absolute error (IAE) values of X D 1 , A C E and X D 2 , C H L are reduced by approximately 10% and 3%, respectively; while under the CC–TC strategy, the reductions reach about 26% and 55%. Moreover, across four disturbance scenarios, the steady convergence times of both composition purities are shortened by more than 5 h compared with PI controllers. These results highlight the advantages of the proposed MPC strategies in disturbance rejection and transient product quality regulation. These findings underscore the effectiveness of closed-loop system identification as a basis for advanced control of PSD processes. • MPC of PSD for separating a maximum azeotrope of acetone and chloroform. • The identified linear state-space model can accurately describe the dynamic features of PSD. • Control by MPC using identified model is better than PI. • Better dynamic performance of control structure with MPC CC-TC controllers.

Source: Journal of Process Control

DOI: 10.1016/j.jprocont.2025.103589