Work

Design and Implementation of a LiDAR-Based Inspection Device for the Internal Surveying of Subsea Pipelines

Year: 2025

Type: article

Abstract: Subsea pipelines are extensively utilized in transportation systems. Conducting regular and effective internal inspections of these pipelines to promptly identify internal defects and potential risks is of paramount importance to ensure safe operational practices. In response to the practical engineering requirements for the internal inspection of subsea pipelines, this paper presents the design of an inspection device capable of capturing point cloud data from pipelines with internal diameters of 100 mm and above and performing three-dimensional reconstruction through coding. This device clearly reveals internal pipeline defects and enables both qualitative and quantitative analyses. Upon designing the motion module, control system, and LiDAR-based detection module of the internal pipeline inspection device, the capacity to collect internal point cloud data and perform 3D reconstruction was achieved. An experimental prototype of the inspection device was manufactured and tested using a simulated pipeline constructed to replicate real-world conditions. An analysis of the inspection results demonstrates that the device can travel steadily inside the pipeline, and the collected point cloud data can be used for 3D reconstruction via coding, accurately and clearly displaying the internal 3D structure of the pipeline and its defects. This device provides a basis for the prediction of pipelines’ service lives.

Source: Journal of Marine Science and Engineering

DOI: 10.3390/jmse13112141