Work

Adsorption Kinetics and Pollutant Capture in Aqueous Media Using Biochar from Pyrolyzed Fique Pellets

Year: 2025

Type: article

Abstract: Biochar has emerged as a promising adsorbent for removing organic pollutants from aqueous media, with its efficiency strongly influenced by the feedstock and pyrolysis conditions. In this study, biochar produced from fique pellets under controlled pyrolysis was evaluated using methylene blue (MB) as a model contaminant. The cation exchange capacity reached up to 17 meq g−1 for biochar obtained at lower temperatures, while those produced at 700 °C showed values below the detection limit, consistent with the depletion of oxygenated functional groups observed in FTIR spectra. Batch adsorption experiments revealed removal efficiencies above 99% for biochar produced at 550 °C and 700 °C (45 min). The 700 °C biochar exhibited faster initial adsorption due to its larger surface area, whereas the 550 °C biochar achieved higher and more stable overall removal over prolonged contact times, attributed to the preservation of surface functional groups and measurable CEC. Kinetic modeling demonstrated that the adsorption process followed the Özer model, indicating heterogeneous surface interactions and diffusion-controlled steps. These results highlight the influence of pyrolysis temperature on adsorption kinetics and support the potential of biochar obtained from fique pellets as a sustainable, low-cost material for water purification and agro-industrial residue valorization.

Source: Reactions

DOI: 10.3390/reactions6040061