CFD analysis of the influence of biofouling growth on ship resistance under variable trim and draft conditions
Year: 2025
Type: article
Abstract: This study examines how trim and draft variations affect the resistance of a full-scale KRISO Container Ship model, considering marine biofouling as a critical contributor to increased hull roughness. Marine biofouling is defined as the growth and accumulation of marine microorganisms on surfaces submerged in aquatic environments. To conduct this study, seven trim configurations, three drafts, and three levels of hull roughness due to biofouling were evaluated using computational fluid dynamics with an open-source Reynolds-averaged Navier–Stokes solver, resulting in sixty-three different combinations. The objective was to quantify how each of these parameters affects the ship's hydrodynamic performance in terms of frictional resistance at a constant speed under calm water conditions. To achieve this, the integrated rough wall function model of OpenFOAM was employed, which accurately characterized the model's roughness without meshing biofouling geometrically. Variations in trim and draft altered the pressure distribution, directly impacting frictional resistance and, consequently, fuel consumption and carbon emissions. A well-optimized trim configuration for the design draft reduced the model's total resistance by 3.94 % in a smooth hull condition and by 1.13 % in a rough hull condition after 24 months of exposure in a real marine environment, emphasizing the importance of proper load distribution on board. • CFD proves effective in evaluating ship trim and draft effects on total resistance under varying hull roughness from biofouling. • OpenFOAM's integrated rough wall function model accurately simulates hull roughness without 3D biofouling modeling, reducing computational costs. • Ship resistance strongly depends on draft, as it determines wetted surface area; reduced draft lowers frictional resistance if the hull is clean. • Resistance reduction lessens as hull roughness increases, showing a non-proportional rise in total resistance with biofouling-induced roughness. • Trim variations affect resistance differently across draft conditions; optimal trim reduces total resistance more effectively at lower roughness levels.
Source: Ocean Engineering
Language: English
Subfield: Ocean Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: hybrid
Estimated APC paid: $4,150
Funder: European Commission
OpenAlex ID: W4416384728