Year: 2025
Type: article
Abstract: This study investigates the influence of Fused Filament Fabrication (FFF) parameters on the properties of polyamide (PA, Nylon™) parts, which are valued for their excellent mechanical properties in additive manufacturing. The parameters examined include infill structure (diagonal and honeycomb), infill density (60%, 80%, and 100%), and sample orientation (0°, 45°, and 90°) relative to the build plate. Filaments from five manufacturers were tested, with injection-molded samples serving as references. Standard tensile strength tests were performed. The results indicate that the 0° orientation yielded the highest tensile strength, while the 45° and 90° orientations exhibited distinct behaviors associated with the geometry of additive manufacturing. The highest Young's modulus was obtained for solid infill at 0° orientation. Although infill structure had a smaller effect, the honeycomb pattern provided more stable and superior mechanical properties at higher infill densities. The study compared filaments from different manufacturers, identifying two that met the tensile strength requirements for telerehabilitation device case prototypes.
Source: Materials
DOI: 10.3390/ma18225241
Institution: West Pomeranian University of Technology in Szczecin
Language: English
Subfield: Automotive Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $3,137
OpenAlex ID: W4416407754