Work

Modeling CO in large eddy simulations of premixed turbulent jet flames with flame-wall interactions

Year: 2025
Type: article
Abstract: The oxidation of carbon monoxide (CO) typically occurs on much longer timescales than the main combustion process, which makes CO emissions difficult to predict with reduced order models. The CO chemistry is further complicated by interactions with turbulence and with cold walls. In this study, a novel model is implemented, which considers both turbulence-chemistry interaction (TCI) and flame-wall interaction (FWI) within the same parameter set to accurately model CO in turbulent, wall-bounded flows. The model is evaluated in large eddy simulations (LES) of premixed turbulent methane/air flames with FWI and validated with data from a direct numerical simulation (DNS) of the same configuration. The combustion model is a flamelet model with tabulated chemistry, compiled from detailed chemistry calculations of 1D flames. In the LES, the necessary quantities are retrieved from the chemistry table via three control variables: the combustion progress variable, an enthalpy defect term to account for wall heat loss, and a flamelet index to consider turbulent strain. The turbulent strain is included by tabulating strained counterflow flamelets and the enthalpy levels are varied by changing the unburnt temperature of the flamelets. Additionally, a transport equation for CO is solved to model transport effects not included in the table. The results show that the tabulated chemistry model is able to accurately reproduce global flame properties such as flame length and fuel flux, if both the wall heat loss and the turbulent strain are considered in the model. In order to predict CO correctly, the additional CO transport equation is necessary. Novelty and significance statement This paper presents a novel model for the prediction of CO in turbulent premixed combustion and the a posteriori evaluation in LES. To the authors knowledge, this is the first model to consider the combined effects of flame-wall interactions and turbulent strain on CO. The model is evaluated in turbulent jet flames in the thin reaction zones regime with a relatively high Karlovitz number. In contrast to many investigations of FWI, the simulations were performed with elevated pressure and temperature.
Language: English
Open Access status: hybrid
Estimated APC paid: $4,320
OpenAlex ID: W4416675090
FWCI: 0.734
Cites: 36
Cited by: 2
Related to: 10